Shielded EZ RJ45 with Snagless Boot

New! Male "N" V-Bite

Proprietary Engineering Allows Board to Board          Direct Connections to PCBs Without Additional       Cables or Connectors

Bomar Interconnect Products Inc., a premier manufacturer and designer    of quality connectors and accessories for RF, video and broadcast transmission, is the addition of a SMB interconnect to their proprietary Eliminator ^TM Series. The coaxial Series, which already consists of a family of F connectors, is expressly engineered to eliminate the need for extra cable assemblies and PCB connectors traditionally required to mate box-type, or modular integrated components to boards. Manufacturers  need only connect an Eliminator directly to an electronic device, and drop  it onto the PCB. In addition to significantly reducing installation time, the subminiature SMB Eliminator promotes board space conservation along with circuit miniaturization. The interconnect is available in 50 ohm and 75 ohm impedance, and provides broadband performance with extremely  low reflection DC through 4 GHz.

New High Definition Connector for Belden 179DT

This high definition BNC connector is made specifically for Belden 179DT miniature video cable allowing true HD performance using the smallest high definition cable in the industry. Used in applications where both space a weight are critical. Also suitable for standard RG179 with BD17900 Tool          (Ask for part number HBC179DT)

New Quick Release SMB

This new design FAKRA SMB enables a quick release in a blind mating or in a difficult position of the SMB mating connector. Specifically designed for many of the new wireless control applications in automobiles and other modes of transportation this part lends itself to FAKRA compliance with the addition of a molded housing. Now available from stock!

 New Narrow Profile decorative knurled nut for               " X-2 " connectors (364 series)

These knurled nuts allow easier clearance when applying to the"X-2" Dual BNC connector (364 series). They also enhance the appearance of the single port 364 series connectors. (Ask for part number 364KNT)

Now available from Bomar Interconnect. PC board mountable, The X-2 Dual BNC jacks available in either           right angle (as shown in photo) or vertical configurations.     Bob Behrent, president of this leading manufacturer of          quality connectors and accessories for voice, data and broadcast transmission, made the announcement.        Designed to satisfy engineers' requirements for maximizing    both PC board  space and installation efficiency, these new dual jacks  accommodate two  connectors in the space of    one. A back plate is also available for full shielding. They       are  ideally suited for use in a wide range of computer,       radio, telecommunications, professional video, broadcast    and    medical equipment, and test instrumentation applications.                                                                AVAILABLE !! in Mini BNC, Twin-BNC and TNC

Go to "Dual BNC" Press Release

Mini BNC Saves One Third PCB Space

Because real estate has become more and more of an        issue, the Mini-BNC series is becoming more attractive due      to it's 1/3 smaller size. The Mini-BNC V-Bite ^TM design         offers the best electrical specification for today's higher frequencies as well as the best mechanical features for      ease of soldering and robust fixturing to the PCB. The       smaller size, combined with the lowest profile BNC on the market   allows for designs    to be more compact without sacrificing   the quick-connect method of mating.

RCA Crimp Saves Installation Time

This new Broadcast Grade crimp RCA plug will crimp             onto standard RG 6 and RG 59 style coaxial cables and          the new mini-RG59 type. The introduction of this series         will compliment the Bomar SBC series 75 ohm connectors    which are supplied to the broadcast systems integration      and OEM industry throughout the US and Canada.

The E-Snaps^TM ability to lock firmly in place for re-flow         soldering, while eliminating the time and cost associated with     applying an adhesive, positions Bomar's newest connectors        among the most reliable and innovative in the industry. Available interfaces: SMA, SMB, SMC and MCX. The E-snap is the connector of choice in wireless systems. 

NEW High Frequency version to 20GHz. P/N 961E504HF

Go to "E-Snap" Press Release

Low Profile MCX Edge Mount Connector

MCX E-Snap™ LP, a low profile MCX connector to its            E-Snap Series of board edge connectors. Engineered           for use with PCMCIA cards and for  use in wireless  applications, it incorporates a proprietary design to         ensure exceptional board retention and RF performance without the use of an adhesive.

Go to "Low Profile E-Snap" Press Release

Specifiers' Solution to Limited PCB Space Designs

This unique edge mount rf connector ensures the integrity       of video and data in the broadest spectrum of HDTV,        MATV, CCTV and GPS applications. The V-Bite ™ is        available in BNC, TNC , F, Twin BNC and N styles, and      mounts centered on PCBs to minimize footprint and profile.      By snapping and locking into place above and below the    board, it provides the utmost in anti-rotation abilities.
Bomar's V-Bite ™ is manufactured of machined brass and features a straight-through contact design to eliminate reflection factor and provide an optimum VSWR of 1.05:1

NOW AVAILABLE!! Bomar's new tool for use with either standard hex screwdriver handles or torque controlled       electric or air drill-type devices for knurled nut (361 KNT).   This tool will afford fast installation, easy access and controlled torque. (Ask for part number BD36100)

NOTE: The V-Bite "F" type offers up to -40.3 dB return loss @ 2.3 GHz. The "BNC" type offers up to-35.0 dB return loss @ 3.0GHz G    Hz. Available in Twin BNC (see Press Release)

V-Bite Demo

Go to "V-Bite" Press Release

BNC Automatic Terminating PCB Jack

A mechanical switching mechanism will actuate when the      plug is removed from this connector. The circuits then bypassed through a 75-ohm resister that is shorted to        the ground of the connector. The shown vertical PCB         style can    be modified to several other configurations including bulkhead mounted devices and PCB switching configurations. Currently this product is not a stock item       so it can be modified to the customer’s requirements.

MC Card Connector

This is an introduction of a new micro miniature coaxial connector that features "Snap-On" mating. It has been designed for applications where miniaturization is required. PCMCIA cards, ISA cards designers will have a particular interest in this connector. Other applications include         WLAN interconnections. The MC Card connector can           also be used with antenna applications utilizing                    PMR / Tetra designs.

PressFit Promotes Efficient Fixturing

The Press Fit's ^TM highly innovative gold pin is engineered      for low insertion force onto the PCB board offering a low      cost alternative to fixturing. This product is available in a     wide variety of styles and configurations for video and surveillance applications.

BOMAR'S New "ELIMINATOR ™ " CONNECTOR
For SET-TOP BOXES

Now, TV set-top box manufacturers can save time,           money and PCB space by connecting tuner modules        directly to the PCB! Bomar's newest male F connector,        the "Eliminator", is designed specifically to eliminate the     cable once required to mate the assembly to the board.   Simply connect the right-angle Eliminator to the tuner     module and drop the assembly onto the board. Quality engineered of precision machined brass, and featuring      Teflon insulators and gold plated contacts, the Eliminator       is provided to accommodate a wide array of center line heights.

(Now also available inCat 6)

EZ-RJ 45 Demo

"The easiest to install Cat. 5 / Cat 6 connector ever."

The new patented EZ-RJ45™ connector simplifies             installation by allowing the pairs to be inserted through            the connector. There is no difficult to handle liner or wire      bar to deal with. Inspection of the correct conductor order     is done before crimping so no connector is wasted because    of incorrect wiring.
The conductors are able to be pulled forward so the pairs    are very close to the contacts. This method allows the integrity of the pairs to maintain Category 5, and even enhanced Category 5 capabilities. Can be used on solid or stranded conductor. (Also available in Category 6.)
The EZ-RJ45™ can be crimped with most any standard        tool, then trimmed with a cutter or small utility knife.   However, the new BD45000 crimp tool crimps and trims       the exposed conductors in one operation. The vertical      action of the tool makes a uniform and positive crimp.

Push-EZ ™ "F" Requires No Tool

Bomar's Push-EZ ™ Installs to cable without a tool.

• Strip the cable
• Push on the connector
• You're Finished!

Available for RG59 and RG6                                                For Information Call: 973-347-4040

Push-EZ Demo

The 1st Choice In True 75 Ohm HD Connectors

Engineered to terminate most broadcast coaxial cables, Bomar's SHADOW ™ meets all the HD -TV/ RF         requirements. It provides superior VSWR, impedance,           and return loss at 3GHz, making it ideal for digital video         and telecom applications. The connector features quality machined  brass with Teflon insulators and semi-captive    gold-plated contacts. Further, it's easy to identify! The SHADOW's distinctive black nickel anodized BNC coupler        sets it apart from lower frequency 75 ohm connectors.

True 75 Ohm Connectors Exclusively for Studio Use

Offering unparalleled aesthetics and meeting all          mechanical, electrical and environmental standards,         Bomar's SBC (Specialty Broadcast Connectors) Series     includes BNC, N, TNC and F styles. These connectors are engineered of precision machined brass with a heavy,        bright nickel plating. They feature Teflon insulators and     gold-plated, semi-captive contacts to ensure continuous reliability. While no special tooling is required, hand crimp   tools to fit each connector are available.                            Go to "Specialty" Press Release